Edge CTS Bedienungsanleitung PDF herunterladen (Seite 27)

MYSTYLE SOFTWARE

Installation Instructions

EAS

TABLE OF CONTENTS INTRODUCTION HARDWARE INSTALLATIONS MYSTYLE SOFTWARE

This section explains how to

use Edge’s MyStyle® software

to conﬁ gure your sensor output

data so it can be read and in-

terpreted properly on your CS/

CTS device

In order for you to complete the

following steps, you will need:

1) Access to a computer.

2) CS or CTS Device

3) USB Cable (See Quick In-

stall Guide)

4) MyStyle® Program installed

on your computer.

STARTING MYSTYLE

1) Remove and unplug your CS

or CTS from the truck com-

pletely. (Do not leave the OB-

DII cable plugged into the CS

or CTS while using MyStyle®.)

2) Double-Click the MyStyle®

Icon located on your desktop to

open the program.

3) The computer will ask you to

“Please connect your device to

continue”.

4) Plug the USB cable into your

computer and into to side of

your CS or CTS device and set

the device aside.

5) The following screen will ap-

pear on your computer:

Figure 45

NOTE: Look to the lower right

of the screen. There is an op-

tion to “Check for updates”. It

is always good to update each

time you open MyStyle®.

6) The button in the center of

the screen will show that you

have plugged in your CS or

CTS, and will display your

device’s serial number.

7) Click the button to continue.

The following screen will ap-

pear:

Figure 46

U S I N G M Y S T Y L E - E A S D E V I C E S

USING MYSTYLE - EAS DEVICES

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Edge CTS Bedienungsanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Touchscreen-Monitore Edge CTS