Edge CTS Betriebsanweisung PDF herunterladen (Seite 29)

OPERATING INSTRUCTIONS

USER GUIDE

TABLE OF CONTENTS INTRODUCTION PARTS DESCRIPTION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX

4. Once you have recorded for

a desired period of time, return

to the Data Logging menu, and

choose the same run as before.

(This will turn the run “Off”

and stop the device from record-

ing. The recorded information

will be stored for the My Style

software to retrieve later on).

NOTE: If you turn the same

Data Run back “On” the previ-

ous data will be erased, and

a new recording session will

begin. If the indicator light is

red, there is currently a record-

ed ﬁ le associated with that run.

MAINTENANCE MANAGER

The Maintenance Manager

calculates the odometer value of

your vehicle using the vehicle

speed and time.

NOTE: The Maintenance

Manager odometer reading

may become out of sync with

the actual dash odometer read-

ing. You may need to periodi-

cally update the Maintenance

Manager’s odometer value.

It is important to note that

the CS/CTS only tracks miles

traveled when the main gauge

screen is being displayed. If

you are in the menus while

driving, your miles are not

calculated.

ODOMETER SETUP

1. Locate the “ Maintenance

Manager” by entering the

“Main Menu”.

2. Turn “ON” the Maintenance

Manager. (If it is turned off,

you will not be notiﬁ ed when

service is due.)

Figure 13

3. Choose “Odometer” to set

your current Odometer reading.

The screen shown in Figure 14

will appear.

Figure 14

4. Use the Arrow buttons to

adjust the values up or down.

5. Press the Enter button to

move to the next Digit.

6. Once all digits have been en-

tered, the Maintenance Manager

screen will reappear showing

your entered value.

(See example in Figure 13.

A value of 49,170 was entered).

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Edge CTS Betriebsanweisung Seite 29

Kommentare zu diesen Handbüchern