
System can delay the alarm output for specified time after alarm ended.
The value ranges from 10s to 300s.
System can upload the alarm signal to the centre (Including alarm
centre.
System auto activates motion detection channel (multiple choices) to
record once alarm occurs (working with motion detection function).
Please note you need to go to Chapter 4.4 Schedule to set motion
detection record period and go to chapter 4.2 Manual Record to set
current period as auto record.
System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.
If you enabled this function, System can send out email to alert you
when alarm occurs and ends.
Display the selected video in local monitor window.
Tour interval and tour mode are set in DVR local menu (chapter
5.3.9 Display )
Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.
You need to input capture channel number so that system can backup
motion detection snapshot file.
It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels.
You can click save button after you complete setup for one channel,
or you can complete the whole setups and then click save button.
Click this button to get device latest configuration information.
7.3.2.8 PTZ
The ED-DVR12004 does not support PTZ function.
PTZ interface is shown as in X470H470H470HFigure 7-42X
Please note, before operation please make sure you have set speed dome address. And DVR and
speed dome connection is OK.
Kommentare zu diesen Handbüchern